NAD C300 - Manual (Page 2)

SPECIFICATIONS - NAD C300
Stereo Mode
Continuous Average Power Output into 8 ohms 25W
(Min. Power per channel, 20Hz-20kHz, both channels driven, with no more than rated distortion)
Rated impedance 4-8ohms
Rated distortion
(THD 20Hz-20kHz)
0.03%
Clipping power
(maximum continuous power per channel)
30W
IHF dynamic headroom at 8 ohms +2.4dB
IHF dynamic power: 8 ohms 43W
4 ohms 65W
2 ohms 90W
Damping factor (ref. 8 ohms 50Hz) >100
Peak undistorted O/P current
(into 0.1—0.5ohms, both channels running)
40A
Frequency response 20Hz-20kHz
(Tone Control in)
<± 0.5dB
at 10Hz/70kHz -2dB
THD
(Total Harmonic Distortion, 20Hz-20kHz, from 250mW to rated output)
<0.03%
SMPTE I. M.
(IM distortion, 60Hz + 7kHz, 4:1, from 250mW to rated output)
<0.03%
IHF I.M.
(CCIF IM distortion, 19+20kHz at rated output)
and DIM 100 <0.03%
Line Level Inputs (DISC, CD, Video, Aux, Tuner, Tape 1, Tape 2)
Input impedance
(R and C)
210kohms/320pF
Input sensitivity
(ref. rated power)
200mV
Maximum input signal 5V rms
Signal /Noise ratio, A-weighted (ref.1W) >100dB
(ref. rated power) >114dB
Line Level Outputs (Tape 1&2)
Maximum output level
5V rms
Tone Controls:
Treble (at 10kHz) ±6dB
Bass (at 100Hz) ±5dB
Physical Specifications
Dimensions in mm (W x H x D) 435 x 80 x 285mm 17 1/8" x 3 1/8" x 11 1/4"
Net weight 5.0kg 11 lbs
Shipping Weight 6.2kg 13.6 lbs
NAD reserves the right to change specifications or design at any time without notice. All specifications are those in effect at time of printing.
Printed in Canada.