Newcon Optik NVS 6 - Manual (Page 24)

23
Table 2-4 Checkout finishing.
Step Item Procedure NO-GO criteria
16 System a. Disconnect the goggles from the
mount by reverse sequence (see step
13), cover the eyepieces and
objective lenses by appropriate
covers and fit the
goggles into the carrying case.
b. Disconnect power pack connector
from mount connector, remove two
battery cartridges and fit cartridges
(incl. batteries) into the carrying
case. Stow power pack into carrying
case, so the cable connector faces
down.
2.3 ASSEMBLY & PREPARATION FOR USE
CAUTION
The NVS 6 is a precision optical instrument and must be handled
carefully at all times, to prevent damage.
CAUTION
Be sure - the power pack is switched off before
installing the batteries.