Newcon Optik NVS 6 User Manual
Page 8
7
1.2.1 Mount assembly
The mount assembly or the mount (Fig.1-3) attaches to the
existing visor guard of helmets and contains a vertical adjustment
for moving the goggles up or down, a fore-and-aft adjustment for
optimal viewing of the field of view and tilt adjustment for
optimal line-of sight viewing. It also allows the goggles to be
stowed in the up position away from the eyes and to be pulled off
or to break away during a crash load of 10g force or more. The
bottom of the mount incorporates: a low-battery indicator (red
LED) that either comes on or blinks to alert the pilot when
remaining battery life is approximately 30 minutes; a connector
plug that provides the electrical contacts and mechanical quick
interconnection mechanism for goggles.
Connector plug
Figure 1-3. Mount assembly