Night Owl NO8LCD - Manual (Page 5)

User’s Manual
5
SAFETY INSTRUCTION:
1. Use proper power source.
Do not use this product with a power source that applies more than specified voltage
(100-240V AC).
2. Never insert any metal into the monitor or any openings.
Putting metal into the monitor case can cause danger of electric shock.
3. Do not operate in wet or dusty area.
Avoid places like a damp basement or dusty hallway.
4. Do not expose this product to rain or use near water.
If this product accidentally gets wet, unplug it and contact technical support immediately.
5. Keep product surfaces clean and dry.
To clean the outside case of the monitor, use a lightly dampened cloth (no solvents). Do
not use any cleaning solutions or cleaner.
6. Provide proper ventilation.
Use in well ventilated area to avoid overheating of the device.
7. Do not attempt to remove the top cover.
If any abnormal operation is observed, unplug it immediately and contact technical support.
Warning: You may be subjected to severe electrical shock if you remove the cover of the
device.
8. Handle box carefully.
If you accidentally drop your monitor on any hard surface, it may cause a malfunction. If the
device doesn’t work properly due to physical damage, contact an authorized dealer for
repair or exchange.
9. Make sure there is good air circulation around the unit.
This device generates heat during operation. Do not block air holes/vents that reduce the
generated heat while the system is running. Install or place this product in a well ventilated
area.