Night Owl NO8LCD User Manual
Page 7
User’s Manual
7
INSTALLATION
Mounting on the Wall
1. Carefully measure and align the two screw mounting hole on the back of your monitor with
where you would like to mount your monitor to before drilling.
2. Drill the holes needed to insert the two included wall plugs.
3. Use the included screws to screw into the wall plugs.
4. Connect the power jack of the included power adapter to the monitor.
5. Connect the video output of your DVR or your camera to the Video Input(s) of the monitor
directly or use the included BNC to RCA cable(s).
6. Connect your microphone or audio output of your DVR to the monitor.
NOTE: The back of the monitor should be connected similar as below.
7. Hang your Monitor to the wall using the two screws secured to the wall in step 3. Your
monitor is now ready for use.