NEC UNIVERGE SV7000 - Manual (Page 50)

– 46 –
Call Forwarding – All Calls
To set
Press Speaker . Receive dial tone.
If setting for another station, press MULTILINE APPEARANCE .
Press FWD or dial “Call Forwarding – All Calls” access code. Receive special dial tone.
Dial destination station or external telephone number. Receive service set tone.
FWD LED lights (at your station or at the D term of the multiline station you
are setting).
Press
Speaker . Call Forwarding – All Calls is set.
Using the Soft Key
Press FDA Soft Key. Receive special tone.
Dial destination; wait for service set tone.
“
FORWARD SET ” is displayed, call forwarding for all calls is set.
To verify (with D term 8D/16D/32D)
Press FWD .
Display indicates the station number calls are forwarded to.
Note 1: If recipient station is a D term 8D/16D/32D, LCD displays:
Note 2: With Soft Key operation, FDB flashes on the display.
Forwarding
station
(Time display)
FORWARD SET 2000
(Time display)
FORWARD SET
MIC >>>
Forwarding
station
(Time display)
FORWARD 2000