Network Computing Devices Gigabit Ethernet Adapter None - Manual (Page 13)

9
5. The Select Program Folder dialog box allows you to accept the default application program folder name
or to assign a name of your preference.
6. Once the installation is complete, a dialog box will appear asking if you want to restart the system. Click
Finish to accept.
3.3 Wireless LAN Monitor Utility
Wireless USB Adapter has its own management software. Users can control all
functions provided by the application named Wireless LAN Monitor Utility. The Utility icon will
appear in the taskbar by clicking the Wireless LAN Monitor Utility shortcut on your desktop. The
monitor Utility includes six tabs: Monitor, Statistics, Site Survey, Encryption, Advanced, and
Version.
In AdHoc mode, the Channel and SSID must be the same among stations so that the computers
can communicate within the local LAN properly. Moreover, all connected computers should have
the same netid and subnetid, you can follow the procedure below to check whether you have the
same netid and subnetid among stations:
1. Right-click on the Network Neighborhood on your desktop and then click on “Properties”.
2. In Configuration, click on “TCP/IP -> Wireless USB Adapter ” and then click on
“Properties”.
3. Click on “IP Address”.