Network Computing Devices Gigabit Ethernet Adapter None - Manual (Page 9)

5
Chatper 3 Step by step Installation Guide
This section will lead you through the installation of Wireless USB Adapter and Wireless USB Adapter
software in through details. You may wish to skip to quick installation guide to wireless networking.
To establish your wireless network connection, the following steps should be executed.
1. Install the Wireless USB Adapter .
2. Install the software using the installation CD.
3. Install the required network protocols to communicate with your network. Most likely, you will need the
TCP / IP protocol.
The product is designed to operate in Windows 98, Windows Me, and Windows 2000. And the installation
procedure is about the same. Please follow up the installation wizard that provided by your system to install
the software. The example here is based on the Windo ws 98SE.
3.1 Install Wireless USB Adapter Driver
1. Plug the connector of the USB cable, which has been connected to the Wireless USB Adapter , into any free
USB port on your PC.
2. Windows will automatically detect the USB Adapter as a new device and display the Add New Hardware
Wizard dialog box. Click Next to continue.
Note: If you’re asked to insert a “ Windows 98 CD-ROM “ during the installation, insert your “ Windows 98
CD-ROM “ and click “ Yes “. Once the setup task is completed, the “ Microsoft Internet Explorer “ should
start up. Please close it.
Additional Note for Windows 2000
If you install the Wireless USB Adapter under Windows 2000, it will be a little bit different