Eizo RADIFORCE RX211 - Manual (Page 26)


3. Adjustment and Settings
Image Rotation Function <Setup>-<Image Rotation>
This function enables the computer, at startup, to detect the orientation of the monitor and
display images correctly. Disable this function when using the software's rotation function
to change image display orientation.
[How to set]
1. Select <Image Rotation> in the ScreenManager <Setup> menu.
2. Select “Enable”.
3. Change the orientation of the monitor and then restart the computer.
[How to cancel]
1. Select <Image Rotation> in the ScreenManager <Setup> menu.
2. Select “Disable”.
3. Restart your computer.
NOTE
• If the orientation is changed while the computer is running, the screen will be displayed
correctly once the computer is restarted.
Mode Preset Function <Setup>-<Mode Preset>
When CAL Switch mode is selected, the computer can be forced to display only specified
modes. Use this function when the display modes are restricted or when the display should
not be changed needlessly.
[How to set]
1. Select <Mode Preset> in the ScreenManager <Setup> menu.
2. Set each mode to “On” or “Off”.
NOTE
• You cannot disable all modes. Set one or more modes to “On”.
[How to cancel]
1. Select <Mode Preset> in the ScreenManager <Setup> menu.
2. Set the mode that you wish to display to “On”.