Network Technologies ST-nXm-U - Manual (Page 11)

NTI NODEMUX MULTI-USER UNIVERSAL KVM SWITCH
7
INSTALLATION & CONFIGURATION
Power OFF all CPUs that will be connected to the NTI Switch before connecting or disconnecting any cables.
WARNING! CPUs may be damaged if cables are connected or disconnected while power is ON.
1. Connect the monitors to the ports labeled "MONITOR x" on the rear of the NODEMUX.
Figure 2- Connect monitor to NODEMUX
Rear View of NODEMUX
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
VIDEO 6
VIDEO 7
VIDEO 8
VIDEO 9
VIDEO 10
VIDEO 11
VIDEO 12
VIDEO 13
VIDEO 14
VIDEO 15
VIDEO 16
USER 1 USER 2 USER 3 USER 4
R
S
2
3
2
NTI
NETWORK
TECHNOLOGIES
INCORPORATED Tel:330-562-7070
Fax:330-562-1999 1275 Danner Dr
Aurora, OH 44202 www.nti1.com R
CPU 1 CPU 2 CPU 3 CPU 4 CPU 5 CPU 6 CPU 7 CPU 8 CPU 9 CPU 10 CPU 11 CPU 12 CPU 13 CPU 14 CPU 15 CPU 16
15HD Male
Video Connector
15HD Female
Video Connector
VGA
Multi-Scan
Monitor
MONITOR 1