NEC 140He User Manual
Page 54
2-26
SLEEP Switch
The SLEEP switch allows you to save almost all power of the server (power-saving mode or sleep mode).
NOTE:
To use the SLEEP switch, an operating system supporting the sleep feature is
required. (Available for Windows Server 2003/Windows 2000.)
POWER/SLEEP lamp
SLEEP switch
POWER switch
Press the SLEEP switch on the front of the server to place the server in the power-saving mode. (The POWER/SLEEP
lamp blinks.) In the power-saving mode, the server retains the memory data and the status of the previous operations.
To resume the original state, press the POWER switch. (It may take a little time to resume the original state.)
NOTE:
The operational level in the power-saving mode depends on the operating system
in use. (Available for Windows 2000.)
IMPORTANT:
Do not change system configuration while turning into the power-saving
mode or in the power-saving mode. Otherwise, you may fail to resume the original state.