NETGEAR RangeMax Next Wireless PCI Adapter WN311B - Manual (Page 37)

NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual
Network Connections and Wireless Security 2-15
v2.0, February 2007
a. Make sure the WN311B software is installed and the WN311B Wireless PCI Adapter is
properly installed in a PCI slot in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profiles box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WPA-PSK [TKIP] and enter the passphrase.
The passphrase can be a word or group of printable characters. For more information on
WPA security, see the Web link to
“Wireless Communications:” in Appendix B .
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.
Figure 2-11
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.