How to use, Putting your machine together – Nostalgia Electrics ICM-562 User Manual
HOW TO USE
After Taking The Unit Out Of The Box
Your OLD FASHIONED SOFT SERVE ICE CREAM MAKER needs little assembly.
Before first use, wipe clean the inside of the unit with a non-abrasive moist sponge or a
non-abrasive towel or cloth and then wipe with a non-abrasive dry towel. See
breakdown picture on page 6.
After cleaning the inside, put the top back on the base of
the unit. See page 8, illustration A.
Wash the mixing paddle, the lid, and the freezer drum.
Now you are ready to enjoy cool, refreshing ice cream from your OLD FASHIONED
SOFT SERVE ICE CREAM MAKER.
To Begin using your Soft Serve Ice Cream Maker
First, after washing, place the drum in the freezer 24 hours or overnight depending on the
temperature in your freezer to get it to the proper (-15° to -20° ) temperature for processing
your ice cream.
Find a stable surface near an electrical outlet before starting. (Make sure the cord is away
from any water source. If needed, it is acceptable to use an extension cord.)
Choose your desired recipe and prepare the mixture in advance, allowing it to chill in the
refrigerator to achieve the desired temperature.
1. Plug in your unit in the OFF position.
2. Remove the drum from the freezer and place it in the OLD FASHIONED
SOFTSERVE ICE CREAM MAKER.™ Make sure the drum is fitted correctly
It he unit enabling the lid to close properly and mixing to proceed. See page 9,
3. Place the mixing paddle into the drum, as pictured in Illustration C, on page 9.
4. Make the sure the spout is connected to the unit by turning counter clockwise and
locking into place. Make sure the
spout is closed by lifting up the handle.
PUTTING YOUR MACHINE TOGETHER
Place the crown top onto the
Base of the unit.
Place the drum inside the crown top.
Make sure the drum is fitted correctly in
Place the mixing paddle into the
Place the lid on the crown and lock into
place. Place the motor unit on, properly
seating the motor rest and fitting the
motor arm over the mixing paddle stem.
After the motor is properly seated
into the motor rest portion of the lid,
the unit is ready to turn on and add
your liquid mixture.