Nortel Networks M7208 - Manual (Page 2)

2
Your Norstar M7208 telephone
Display
shows the time, date, call information and guides you
while using Norstar* features.
Indicators
appear beside active lines and features.
Feature button
starts or ends a feature.
Release button
cancels active calls.
Hold button
Dial pad
Volume control
Memory and line buttons
are buttons with indicators for one
touch dialing, feature operation or line
access.
* Meridian and Norstar are trademarks of Northern Telecom.
Button Inquiry Confirm that your memory and line buttons have the correct snap-on caps by
checking their programming.
1. Release all calls and open lines with dial tone.
2. Press
ƒ•‚.
3. Press the button you want to check.
4. Read the display.
5. Press
ƒ when finished.
1. Press ƒ•‡.
2. Press a number on the dial pad for the contrast level you want, the higher
the number the higher the contrast level.
1. Press ĥfl.
2. Press ⁄, ¤,‹ or ›␣ to hear the different types of rings.
3. While the telephone is ringing, press √ to adjust the volume.
4. Press ƒ to store the ring.
1. Press √ when using the receiver or the speaker.
Selecting a Ring
Type and volume
level
Adjusting receiver or
telephone speaker
volume
Adjusting display
contrast
softer louder
softer louder
Important: All M7208 telephones Release 16 (REL 16) and higher comply with the Americans with Disabilities Act
(ADA). See the label on the bottom of the telephone for the Release marking.