NAD 3100 - Manual (Page 2)

PRE-AMP SECTION
Phono input
Input impedance
(R and C) MM 47k
Ω
/ 100pF
MC 100
Ω
/ 1000pF
Input sensitivity, 1kHz MM 2.5mV ref. 0.5V
MC 0.18mV
Signal/Noise ratio
(A-weighted with cartridge connected)
MM 75dB ref. 5mV
MC 75dB ref. 0.5mV
THD (20Hz - 20kHz) <0.04%
RIAA response accuracy
(20Hz - 20kHz)
±0.5dB
Line level inputs
Input impedance
(R and C)
50k
Ω
/ 500pF
Input sensitivity (ref. 1W) 20mV
Maximum input signal 10V
Signal/Noise ratio
(A-weighted ref 1W)
94dB
Frequency response 20Hz - 20kHz / ±0.5dB
Line level outputs
Output impedance
Pre-amp 600
Ω
Tape Source Z + 1k
Ω
Maximum output level Pre-amp 10V
Tone controls
Treble
±9dB at 10kHz
Bass ±10dB at 50Hz
Bass EQ +3dB at 55Hz
+6dB at 36Hz
Infrasonic filter (switchable) -3dB at 12Hz - 12dB/octave
POWER AMP SECTION
Continuous output power into 8
Ω
* 60W (17dBW)
Rated distortion (THD 20Hz - 20kHz) 0.03%
Clipping power (maximum continuous power per channel) 70W
IHF Dynamic headroom at 8
Ω
+6dB
IHF dynamic power (maximum short term power per channel) 8
Ω
200W (23dBW)
4
Ω
250W (24dBW)
2
Ω
330W (25dBW)
Damping factor (ref. 8 Ω , 50Hz) >100
Input impedance 10k
Ω
/ 600pF
Input sensitivity
(for rated power into 8 Ω )
850mV
Frequency response 3Hz - 100kHz / +0, -3dB
Signal/noise ratio ref. 1W 100dB
ref. rated power 117dB
THD (20Hz - 20kHz) <0.03%
Remote No
NAD Link No
PHYSICAL SPECIFICATIONS
Dimensions (W x H x D)
435 x 106 x 385mm
Net weight 10.5kg
Shipping weight 11.6kg
Power consumption (120 ~ 240V, 50/60Hz) 330VA
* Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.
Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.
Dimension depth excludes terminals, sockets, controls and buttons.
© NAD Electronics. All rights reserved. E & OE