New Balance NB447 User Manual

Sport ear buds with modular cord system, Model: nb447, Limited 2 year warranty

Advertising
background image

Using Your New Balance Sport Ear Buds with Foldable Head Band

Your New Balance Ear Buds feature a foldable headband for compact storage. Unfold the headband

completely, place it over your head and insert the “L” ear bud in your left ear and the “R” ear bud in your

right ear. Adjust the length of the headband for the most comfortable and secure fit.

Your New Balance Sport Ear Buds were designed with a modular cord

system. We have provided a 15” iPod/iPhone control cable that is

suitable if your music player will be worn in an armband or clipped to your

clothing at chest level. We have also provided a 36” cable that is suitable

if your music player will be clipped to your belt, placed in your pocket or

carried in a fanny-pack. You may connect both cables together in case

you want to control your iPod or iPhone and the 15” cable is not long

enough.

Connect the male headphone plug of the ear buds to the female headphone jack of either the 15” or 36”

headphone cable depending on your wearing preference. Then connect the male headphone plug of the

15” or 36” cable to the headphone jack of your music player. Be sure that the plugs are fully inserted into

the jacks. If the plug is not fully inserted you may only hear sound from one earpiece.

Using the iPod/iPhone Control Cable

Connect the 15” iPod/iPhone cable between your headphones and your iPod/iPhone to perform the

following operations with the remote controller mounted on the cable:

Model: NB447

Using the Accessory Cord Winder Clip

Your New Balance Ear Buds are also supplied with a cord winder clip that may be used to eliminate excess

slack in the 36” cable if necessary. If you find that that the 36” cable is too long you can store up to 24” of

cable in the cord winder and then clip the cord winder to your clothing.

Sport Ear Buds with
Modular Cord System

NB464-071410-A Printed in China

New Balance Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants

this product to be free from defects in workmanship and materials, under normal use and conditions, for a period

of 2 years from the date of original purchase.

Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was

originally purchased. Should this fail to resolve the matter and service still be required by reason of any defect or

malfunction during the warranty period, SDI Technologies will repair or, at its discretion, replace this product

without charge (except for a $2.00 charge for handling, packing, return UPS/postage, and insurance). This decision

is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center

listed below. The product must include proof of purchase, including date of purchase. The fee for service without

proof of purchase is $4.00.

Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as

exhausted or defective batteries are the most common cause of problems encountered.

If service is still required:

1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.

2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if

within the warranty period.

3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $2.00 ($4.00 without

proof of purchase).

4. Send the unit prepaid and insured, to the Factory Service Center listed below.

Consumer Repair Department

SDI Technologies Inc.

1330 Goodyear Drive

El Paso, TX 79936-6420

Disclaimer of Warranty

NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not

cover (i) products which have been damaged by negligence or willful actions, misuse or accident, or which have

been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive

heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product

to the Factory Service Center and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners of the product other

than to the original purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their

officers, directors, shareholders, members or agents be liable to you or any third party for any consequential or

incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do not allow limitations

on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This

warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of

warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit

card) for purchase of your SDI Technologies product.

© 2010 SDI Technologies, Inc. All rights reserved

Questions? Visit www.newbalanceaudio.com or

call 1-800-288-2792 Toll Free.

Limited 2 Year Warranty

Using the Water Resistant Connection Cover

Your New Balance Ear Buds are also supplied with a silicon sleeve that can be used to cover the

connection between the male headphone plug on the Ear Buds and the female headphone jack on the 15”

or 36” cable. Use this connection cover if you routinely use your Ear Buds in extremely wet or damp

conditions.
Stretch the connection cover over the plug of the Ear Buds as shown.

After connecting the male plug of the Ear Buds to the female jack on the

15” or 36” cable. Slide the connection cover down so that it completely

covers the plug and jack connection point to seal out excess moisture.
Safety Information

To protect your hearing, always start listening with the Volume Control of

your music player set to a low level and gradually increase the volume to

a comfortable listening level.
IMPORTANT! Listening at high volume for long periods of time can result

in long-term hearing damage. For your safety, do not use headphones if

they would prevent you from hearing warning sounds, such as while

driving a car or motorcycle, riding a bike, etc.
NOTE: In extremely cold or dry air conditions you may notice a slight

‘tingling’ feeling in your ears when using in-ear headphones. This is the

result of the build-up of static electricity in your body. This is normal and

not an indication of any problem with your headphones.

Authorized Licensee of New Balance Athletic Shoe, Inc.

New Balance and Flying NB are registered

trademarks of New Balance Athletic Shoe, Inc

To Do This

Action Required

Activate voice control*

Depress the Master Control for 2 seconds

Answer or end a call

Press the Master Control once to answer call

Press the Master Control again to end call

Ignore an incoming call

Depress the Master Control for 2 seconds

Answer a second incoming call

Press the Master Control once to answer second call

and place original call on hold

Press the Master Control again to return to first call

Answer a second incoming call,

Depress the Master Control for 2 seconds

and end original call

2 low tones will confirm end of original call.

Switch between two calls

Press the Master Control once to switch between calls

Play or Pause

Press Master Control once to Play, again to Pause

Skip Track or Chapter Forward

Press Master Control 2 times quickly

Skip Track or Chapter Back

Press Master Control 3 times quickly

Increase Volume

Press the "+" button

Decrease Volume

Press the " - " button

Activate VoiceOver**

Press and hold the Master Control to hear title and

artist of currently playing song

Navigate Playlists using VoiceOver**

Press and hold the Master Control until tone is heard,

then release. When the name of the desired playlist is

heard, press the Master Control once to select it.

Click to Increase

Volume

Click x2 for Next Track

Click x3 for Previous Track

Press + Hold for iPod

Shuffle VoiceOver

Click to Decrease

Volume

Click to Play/Pause

Master Control

close the cord winder

wrap cord clockwise around the

spool to reach desired length

open the cord winder

using the small tab

under the clip

pass the plug down

and through the cover

clip it on and go!

wind over

20 inches!

pull the cord back up

and over the spool

Advertising