NEC IP3AT-8WV(AUSTRALIA) - Manual (Page 45)

29
To Setup Group Illumination:
- Press the key to select “3.Illumination”
and then press the key.
- Press the key to select a Group
Illumination you want and then press the
“OK” soft key.
-
The display returns to the previous screen.
By pressing the “On” or “Stop”
soft key, you can view the
Illumination while you select a
Group Illumination.
To Setup Group Vibration setting:
- Press the key to select “4.Vibrator” and
then press the key.
- Press the key to select the Group
Vibration setting you want and then press
the “OK” soft key.
-
The display returns to the previous screen.
By pressing the “Conf” or “Stop”
soft key, you can confirm the
Vibration setting pattern while you
select a Group Vibration setting.
• TO ADD A NEW ENTRY
- Press the key while in Standby mode.
Your phone displays the main menu.
- Press the key to select “2.Directory”
and then press the key.
- Press the key to select “2.Edit” and then
press the key. Your phone displays the
Edit menu.
-
Press the key to select an Item you
want to edit and then press the “Edit” soft
key.
- Edit the selected item. In the following
example, Name data is edited.
Name information is minimum
requirement to save the data.
-
Press the “OK” soft key to write the data.
The display returns to the previous screen.
Illumination
On OK Back
1.Disable
2.Default
3.Red
4.Green
TIP
TIP
Vibrator
Conf OK Back
1.Disable
2.Default
3.Pattern1
4.Pattern2
Edit
Edit Back
Name
Group
Tel #1
Tel #2
Name
ab OK Clear
Donald E.
TIP
Edit
Save Edit Back
Donald E.
Group
Tel #1
Tel #2