NAD T531 - Manual (Page 12)

Connections
GB
12
NOTES
• Refer to the owner’s manual of your audio system as well.
• Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before
making any connections.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the
tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,
the speakers may be damaged by a sudden high volume sound.
• Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be
damaged.
WARNING
Do not set the Digital Audio Output of this DVD player to Dolby Digital unless you are connecting the DIGITAL OUT jack of this DVD player to an AV
decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to Selecting Digital
Audio Output on page 20).
VIDEO OUT VIDEO OUTPUT
L
R
S-VIDEO OUT
COAXIAL
DIGITAL OUT
OPTICAL
DIGITAL OUT
AUDIO OUT
S-VIDEO
COMPONENT TO TV
PAL NTSC
AUTO
CONNECTING TO A STEREO SYSTEM
To AUDIO OUT (L/R) To VIDEO OUT
TO S-VIDEO OUT
S-video cable
To S-video input
To video input
Video cable (supplied)
TV or monitor with
audio/visual inputs
Audio cable (supplied)
To audio inputs of
the amplifier
Audio system
If the TV has an S-video input,
connect the DVD player with the
S-video cable.
T531 manual (GB) 6/11/01 11:13 pm Page 12