Adjusting the clutter (weak echoes), Adjusting the clutter (weak echoes) -29 – NorthStar Navigation Echo Sounder NorthStar 491 User Manual

Page 33

Advertising
background image

491 Echo Sounder Operations Manual

Page 29

3. At the GAIN window, press the CURSOR PAD left or right

to adjust the gain, or use the KEYPAD to manually enter
the desired gain value. The available settings range from
zero (minimum) to 75 (maximum).

Gain window

The window shows the effect of adjusting the gain. The

fish symbols near the bottom of the window represent

various echo strengths, and the expanding and

contracting color bar above shows the colors that will be

used to display these echoes. As you adjust the gain to

obtain the best looking picture, also watch the real echoes

on the right side of the screen .

4. Press RETURN to go back to the ECHO screen.

When you adjust the gain, the color of the AUTO and

PICTURE key tabs changes from green to yellow, since

the echo sounder is no longer in automatic mode. Also, a

yellow tab appears under the DEPTH key, indicating that

the range setting is no longer automatically controlled and

that the 491 may not always identify the bottom reliably.

Adjusting the clutter (weak echoes)

The clutter setting selects the echo strength that will be
displayed using the bottom colors of the color bar (the weaker
echoes). Any echoes weaker than this selection will not be

Advertising