Nady Systems PCS-15 - Manual (Page 2)

(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411
or e-mail at [email protected].
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.
S E R V I C E
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
S P E C I F I C A T I O N S
TECHNICAL DATA
(1)
Frequency Response Analysis
(1) XLR BALANCED INPUT
(2) 1/4" (6.3mm)BALANCED/UNBALANCED INPUT
Tip = hot, Ring = cold, Sleeve = ground.
(3) MIC/LINE INPUT PAD
This button sets the gain range of the GAIN control.
For microphone applications, where more level is needed,
push the button in.
(4) GAIN CONTROL
This controls the input level.
(5) HIGH EQ
(6) MIDRANGE EQ
(7) LOW EQ
(8) LEVEL CONTROL
Overall output level of the PCS-15
(9) HIGH FREQUENCY SIGNAL LED
(10) LOW FREQUENCY SIGNAL LED
(11) ON/OFF INDICATOR
(12) POWER ON/OFF SWITCH
(13) AC SELECTOR SWITCH
Before plugging in the power cord, check to see that this
switch is set to the proper voltage for your area:
~115V (60Hz) or ~230V (50Hz).
(14) AC POWER CORD IEC CONNECTOR w/ INTERNAL
FUSE HOLDER
Connects to the AC power cable.
Fuse: 115VAC ~ 5A 250V 20mm glass tube
230VAC ~ 3A 250V 20mm glass tube
Back Panel (2) (4) (5) (6) (7) (8)
(9)
(3)
(10)
(11)
(12)
(13)
(14)