Nvidia 754 - Manual (Page 26)

Installation
Page 3-10
CD-IN
AUX-IN
CD-IN/AUX-IN: CD Audio_IN Connector
The CD-IN and AUX-IN connectors are used to
receive audio form a CD-ROM drive, TV tuner or
MPEG card.
CD-IN AUX-IN
CFPA: Front Panel Audio Connector
When the jumpers are removed this connector can
be used for front panel audio. The front panel
phone jack should have “normal close” switch.
Without phone plug inserted, the rear panel audio is
enabled. With phone plug inserted, the rear panel
audio will be disabled.
1
Rear Line-out-FR Front Line-out-R
Rear Line-out-FL Front Line-out-L
MIC_In
NC +5V
Key
9
2
10
GND
CD_IN_Left 1
CD_IN_Right
CD_Reference
AUX_IN_Left 1
AUX_IN_Right
GND
Settings:
Pins (5-6) & (9-10) Short (default):
Only the onboard rear panel audio
jack can be used.
Pins (5-6) & (9-10) Open:
Only front panel audio jack can be
used.
SATA1 ~ SATA4: Four Serial ATA Connectors
From nVidia nForce4 SLi supports S-ATA II up to
300MB/sec transfer rate.
From nVidia nForce4 4X supports S-ATA up to
150MB/sec transfer rate.
These connectors enable you to connect Serial
ATA HDDs or optical drives type.
SATA1
SATA4
1
GND A- B- B+ GND A+
GND
~