Nvidia 754 User Manual
Page 44
BIOS
Page 4-14
4-5 Power Management Setup
Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not
be changed unless it’s absolutely necessary.
Figure 6: Power Management
HDD Power Down
Powers down the hard disk drive after a preset period of system inactivity.
Options: Disabled, 1min ~ 15min.
Soft-Off by PBTN
Use this to select your soft-off function. The default is Instant Off.
Instant Off:
Turns off the system instantly.
Delay 4 Second : Turns off the system after a 4 second delay. If momentary
press of button, the system will go into Suspend Mode. Press
the power button again to make system back to work.
PwerOn After Pwr-Fail
This item enables your computer to automatically restart or return to its last
operating status after power returns from a power failure.
Off:
The system stays off after a power failure.
Former-Sts: The system returns to the state it was in just prior to the power failure.