Nokia 9362065 - Manual (Page 112)

Copyright © 2003 Nokia. All rights reserved. 112
• Use existing settings to use existing setting information as the basis for the
new access point settings. A list of existing access points is opened. Select one
and press
OK . Access point settings are opened with some fields already filled.
Editing an access point
When you open Access points, the list of already
available access points opens. Scroll to the access
point you want to edit, and press
.
Options when editing access point settings:
Change , Advanced settings , Help , and Exit .
Access points
Here you can see a short explanation for every setting
that may be needed for different data connections and
access points.
Start to fill in the settings from the top because depending on what data
connection you select (
Data bearer ) only certain setting fields are available.
• Connection name - Give a descriptive name for the connection.
• Data bearer - The options are GPRS , Data call , and High speed (GSM) .
Depending on what data connection you select, only certain setting fields are
available. Fill in all fields marked with
Must be defined , or with an asterisk.
Other fields can be left empty, unless you have been instructed otherwise by
your service provider.
Note: To be able to use a data connection, the network service provider
must support this feature, and if necessary, activate it for your SIM card.