Nokia 9362065 - Manual (Page 115)

Tools
115 Copyright © 2003 Nokia. All rights reserved.
Note: Charges may apply for certain types of received calls, such as
roaming and high speed data calls. Contact your GSM network operator for more
information.
Note: The phone expects the callback call to use the same data call settings
that were used in the callback-requesting call. The network must support that
type of call in both directions, to and from the phone.
• Callback type - The options are Use server no. / Use other no. . Ask your service
provider for the correct setting to use; it will depend on the service provider’s
configuration.
• Callback number - Key in your phone’s data phone number which the dial back
server uses. Usually, this number is the data call phone number of your phone.
• Use PPP compression - When set to Yes , this option speeds up the data transfer,
if supported by the remote PPP server. If you have problems with establishing a
connection, try setting this to
No . Contact your service provider for guidance.
• Use login script - The options are Yes / No .
• Login script - Insert the login script.
• Modem initialisation (Modem initialisation string)- Controls your phone using
modem AT commands. If required, enter characters specified by your service
provider or Internet service provider.
GPRS
Go to Settings → Connection → GPRS .
The GPRS settings affect all access points using a packet data connection.