Nortel Networks Nortel IP Phone 1110 - Manual (Page 49)

Answering a call
49
Answering a call
Each incoming call causes the telephone to ring and the Message
Indicator lamp to flash.
To answer a call:
While on an active call
This section describes the following features, available during an active
call:
• “Placing a call on hold” on page 49
• “Transferring a call” on page 50
• “Using Timed Reminder Recall” on page 51
• “Using Call Park” on page 52
• “Recording a Calling Party Number” on page 54
• “Tracing a malicious call” on page 55
Placing a call on hold
Use the Hold feature to place an active call on hold.
Lift the handset.
Note: Do not use the Line (DN) key to anwer a call.