Nostalgia Electrics CCP-510 - Manual (Page 9)

8
USING YOUR CIRCUS CART POPCORN MAKER™
(Continued)
Tip the kettle with the red knob to remove the
pieces of popcorn. Once the popcorn has stopped
popping.
D
When removing or replacing the kettle, make sure
It is properly seated in the kettle brackets.
E
Make sure the unit is unplugged before cleaning. Unplug the outer plug to the outlet as
well as the kettle motor plug inside the unit. (See photo item C, item 4 on page 3 for
location of motor plug).

See instructions on page 5 for kettle cleaning.

Use a slightly damp, non-abrasive sponge or non-abrasive towel to wipe clean the
inside and outside of the unit, then wipe with a non-abrasive dry towel to dry.
NOTE: Never immerse the kettle unit in any liquid – simply wipe clean with a damp cloth.
Never place any parts in dishwasher – always wash by hand.


Pull out the kernel catching tray and empty. Wipe out with a damp cloth and dry.
Replace tray. F
CLEANING
1. Switch “OFF” the unit.
2. Pull up the cover and by turning the handle of the bow anti-clockwise, discard any
unpopped popcorn kernels and oil remaining in the kettle.
3. Wipe out the kettle with a disposable clean cloth. The kettle should be clean but
“Seasoned” and ready for the next use.