New Balance 8.0e - Manual (Page 9)

8
Assembly is now complete.
IMPORTANT:
Please read pages 9-10 before beginning
your workout for important instructions
on how to use your New Balance
8.0e Elliptical Trainer.
connectors
computer
book holder
stationary bar
assembly
4
1
3
2
four "C" batteries
stationary bar
assembly
back of
computer
battery
door
vertical
column
tube
water
bottle
holder
remove
screw
remove
screw
STEP 6 – Computer Assembly
a) Remove the Phillips Screws from the back of the Computer.
b) Snap together Connectors for Computer, tucking the Wires inside the Stationary
Bar Assembly.
The Book Holder can be attached to the Computer at any time.
c) Attach the Computer using the four Phillips Screws you removed in Step 6a into
the back of the Computer. Tighten with the Screwdriver provided.
d) Remove Battery Door on the back of the Computer.
Insert four “C” Batteries (included) in numbered order and replace Battery Door.
7
8
Step 8 –
AC Adapter
Insert AC Adapter
into rear of unit,
then plug into wall.
STEP 7 –
Water Bottle Holder Assembly
Remove the two M4 x 12mm Machine
Screws from Vertical Column Tube. Line
up Water Bottle Holder and attach to
the Vertical Column Tube by re-inserting
Screws and tightening them with the
Screwdriver provided.
Front View Back View
AC
adapter
6a
6b
6c