NETGEAR HA311 User Manual
Page 19
19
Verifying Driver Installation
After you have completed Step 3—Install the HA311 Wireless PCI Adapter
Driver on the previous pages, we suggest you follow these instructions to verify
that the HA311 Wireless PCI Adapter driver has been successfully installed on
your PC.
1. From the Windows Desktop, double-click the My Computer icon.
2. Double-click
the
Control Panel icon, and then double-click the System
icon.
3. Click
the
Device Manager folder tab.
4. Double-click
Network Adapters. Locate the NETGEAR HA311 Wireless
PCI Adapter selection (as shown on the next page), and if there is no yellow
exclamation mark or red cross symbol on or beside it, then it has been
successfully installed.
(If one of these symbols does appear, then there was a problem with
installation. Refer to Appendix A— Troubleshooting, on page 40 for more
information.)