Nortel Networks Norstar M7324 - Manual (Page 3)

Page 3
Your Business Communications Manager M7324 Telephone
Using Button
Inquiry Check what is programmed on your memory buttons.
1. Release all calls or lines with dial tone.
2. Press
Д¥в
.
3. Press the button(s) that you want to check and read the display.
4. Press
Ä
when finished.
Adjusting display
contrast 1. Press
Д¥а
.
2. Press
UP
or
DOWN
for the level you want.
3. Press
OK
when finished.
Selecting a ring
type and volume
level 1. Press
Д¥Я
.
2. Press
Ъ
,
Ы
,
Ь
,
Э
, or
NEXT
to hear the different ring types.
3. While the telephone is ringing, press
Ã
to adjust the volume
level.
4. Press OK to store the volume level and ring.
Mounting the
telephone The M7324 telephone can be placed on any level surface. It cannot be
wall-mounted.
Using display
buttons Three display buttons appear directly below
the display. When they are active, these
buttons are labelled in capital letters on the
bottom line of the display. In Business
Communications Manager documents,
display buttons are shown as underlined,
capital letters: for example,
OK
.
Memory and line buttons
have labels for one-touch dialling, feature operation, or line access
Display
shows the time, date, and call information;
guides you while using features;
tilts for easy viewing. The lower line of the
display is reserved for display
button instructions.
Display buttons
Dial pad
Volume control
Hold button
Feature button
starts or ends a feature
Release button cancels active call
Indicators
appear beside active lines and features