Nortel Networks 8672ATMM - Manual (Page 13)

11
Replacing an MDA
To replace an MDA:
1 Remove the 8672ATME or 8672ATMM Module from the
chassis and lay it on a flat, static-free surface. For
information about removing a module from the chassis, refer
to Installing 8600 Switch Modules.
2 Using the screwdriver, unscrew the four screws from the
MDA you want to remove (
Figure 11 ).
Figure 11 Preparing an MDA for removal
Warning: You cannot hot-swap an MDA. You must
remove the 8672ATME or 8672ATMM Module, install
the MDA, and then reinstall the module. For more
information about removing and installing the
8672ATME and 8672ATMM Modules, refer to
Installing 8600 Switch Modules.
9884FA