Nortel Networks 8672ATMM - Manual (Page 9)

7
Installing an MDA
To install an MDA:
1 Lay the 8672ATME or 8672ATMM Module ( Figure 5 ) on a
flat, static-free surface.
Figure 5 8672ATME or 8672ATMM Module
2 Lift the cover out of the MDA slot by unscrewing the two
screws and lifting the cover straight up (
Figure 6 ). Set the
cover aside for possible future use.
Warning: You cannot hot-swap an MDA. You must
remove the 8672ATME or 8672ATMM Module, install
the MDA, and then reinstall the module. For more
information about removing and installing the
8672ATME and 8672ATMM Modules, refer to
Installing 8600 Switch Modules.
9898EA
Online MDA 2 MDA 1
8672 ATM