Step 2 : cabinet assembly, Met al met al, Bott om p anel bott om p anel – Nuvo 500 User Manual
Page 5
~4~
~5~
Use allen key provided or
#3 phillips screwdriver.
Attach TOP and Bottom to
Back by
CAREFULLY aligning
edge holes over Cam Pins
and gently push together to
avoid damaging cam pins.
DO
NOT BANG OR SLAP PANELS
TOGETHER!!!
Insert
Cam, push all the way
in
under panel level (may
require some force) and
make sure
Arrow points to
outside edge.
Gently push down to bring
panels together before you
tighten the
Cam. Start with
cams at each end.
Cam Arrow faces away from
outside edge when tightened.
STEP 2 : CABINET ASSEMBLY
1
����
2
CAM in LOCKED
POSITION
PANEL EDGE
COUPLER BAR
INSIDE
CABINET
2
3
Insert Center
COUPLER
BAR by guiding edge
holes over bottom
Cam Pins. Lightly push
out top panel edge to
allow
Cam Pins to go in
Coupler Bar. Insert and
tighten
Cams.
3
BOTT
OM P
ANEL
BOTT
OM P
ANEL
MET
AL
MET
AL