Eizo 630lt-gr - Manual (Page 45)

Printers
NOTE
• The eClient 630LT-GR/630LT-GR-N supports an LPTx port and a COM1 port.
• Use a RDP protocol to set the printer’s adjustment.
• If you are using the ICA protocol, please refer to the instruction manual of the
Citrix MetaFrame.
Adding another printer settings
Select [Add Printer] icon, and click [Open]. “Printer Properties” dialog box is
displayed. Setup as following the wizard (See page 19 for the details).
Deleting a printer settings
Select the printer icon, and click [Delete].
Modifying the settings
Select the printer icon, and click [Properties]. [Printer Properties] dialog box is
displayed, change the settings as needed.
6. USING THE TERMINAL PROPERTIES
45