NordicTrack ROUTER WITH VOICE 3G10WV User Manual
Page 20
20 –
3G10WV HSPA Wi-Fi Router with Voice
4.1.1 Profile Setup
Your Service Provider will provide the information required to complete the first time setup instructions below.
This includes profile, username and password. Only complete those steps for which you have information and
skip the others.
1. If your SIM card is not inserted into the gateway, please turn the gateway off. Then insert the SIM and turn
the gateway on.
2. Type the APN in the APN field. Authentication Method should be provided by your Internet service provider;
or just leave it to AUTO if not acquired. If you have not received the username and password, leave these
fields empty.
. Select IP compression and Data compression to be ON or Off. By default they are set to off.
4. Click the Save button to save the new settings.
5. Press the Connect button to reboot the router and to connect to Internet. After reboot, the Device Info for
G network box in the WUI Basic screen should indicate an active connection, as shown below. The G and
Internet LEDs on the front panel of the Router should also be blinking.
.
If the LEDs are off, then either your profile settings are incorrect, the SIM card is not working or the service
network is unavailable. In either case, contact Technical Support for further instructions.
NOTE:
If the LEDs light in an on/off pattern moving from left to right this indicates that your SIM is PIN Locked, please lee PIN Lock Off on
page 21 for instruction on how to fix this