Nortel Networks 3100 EN - Manual (Page 16)

Configuring the MC 3100 Web UI
16 NN42030-110 MC 3100 3.1 Standard 04.03 November 2009
Setting up a route schedule
You can optionally set up a route schedule so that at specific times you
receive calls on a specific phone or device.
When call routing is selected, time periods that are not configured in the
route schedule automatically receive Do Not Disturb mode. When in Do
Not Disturb mode, you cannot place outgoing calls from the MC 3100
Web UI without reconfiguring Advanced Call Routing.
Setting up a route schedule
1. From the Settings page, click Use Advanced call routing.
2. Click the Add a route schedule link.
The Add new routing rule pane appears.
3. Create a rule.
a. Select one of the preconfigured devices from the Send calls to
list.
b. Enter the time in the From and To boxes. Use 24-hour format or
12-hour format with am or pm suffix.
Examples: 23:59, 2359, 11:59pm, 1159pm
c. Place a check mark beside the days that this rule should be
active.
4. Click Save.
You can create more than one schedule. For example, you might want
one schedule for your normal working hours, and a second schedule for
regular meetings or appointments.
If you create more than one schedule, the schedule may overlap with
another schedule. Sort your schedules in priority order, so that the more
important schedule is higher in the list.