Before switching off the power, Troubleshooting, Cdn25 – Numark Industries CDN25 User Manual

Page 14

Advertising
background image

CDN25

- The Leader in DJ Technology

©2001 Numark Industries

- 14 -

http://www.numark.com

BEFORE SWITCHING OFF THE POWER:

When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before

switching off the power.

DO NOT switch off the power when

the disc holder is open.

Switch off the power after the

disc holder has been closed

with the “OPEN/CLOSE” button

TROUBLESHOOTING:

Symptom

Possible Cause

Corrective Action

The power fails to switch on when the
POWER switch is set to on

Poor power plug connection at the AC
outlet or IEC Power cord loose from
rear of unit

Insert the power plug firmly into the AC
outlet and make sure connection is
good in unit rear

Disc play does not start

The disc is loaded upside down

The disc is too dirty

Reload the disc with the label side up

Clean the disc

No sound

Improper output cable connections

Improper amplifier operation

Connect the output cables correctly

Check amplifier setup

Sound skips

The CD player is subject to vibrations
or physical shock

The disc is too dirty

Change the installation location

Clean the disc

Hum

Loose cable connections

Firmly connect all audio plugs

Advertising