Numark Industries CDN25 - Manual (Page 6)

CDN25
- The Leader in DJ Technology
©2001 Numark Industries - 6 - http://www.numark.com
FRONT PANEL FEATURES
1. Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray
door will automatic close in 30 seconds if left open. This is to protect the tray from accidental
damage while open
2. Single: toggles the unit to play back just one track at a time (single) or play continuously through
all tracks and then start over repeating the CD infinitely (continuous).
3. Time: switches the time modes on the display between elapsed playing time, remaining time on
the track, and remaining time on the total CD. When toggled to remaining time total the total
number of remaining tracks will also show.
4. LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD.
5. Track Buttons: These buttons are used to select the track to be played.
6. Search Button: Pressing this button allows you to use the wheel and rapidly scan the music to
find a cue point. The search function automatically shuts off after 8 seconds of non-use or you
may toggle it off.
7. Cue: Returns and pauses the music at the last set cue point. The cue point is where the music
will begin when play is pressed. The cue point is set as the initial start point on a track or can be
moved when play is started at a different point. For instance if the music is paused then play is
pressed a new cue point is set. You can easily edit the cue point by turning the wheel during
pause. As you rotate the wheel the music will sound. By stopping the wheel and pressing play a
new point is set. Alternately pressing the PLAY button and the CUE button allows the CD to be
played from the same position any number of times.
Note: Pressing cue 2 times plays music temporarily from this point until the button is released.