Nokia 9600C - Manual (Page 5)

GB 5
SCART cable
The box for your Mediamaster should contain the
following items:
• the Mediamaster
• a remote control handset with batteries.
• a fully featured SCART cable for connection to the TV set.
• Owner’s Manual.
Installation
About the SCART sockets
• On the back side the Mediamaster is equipped with 3 SCART
sockets (see figure). When you connect external sets to any
of theese sockets, always use fully featured SCART cables.
There are “slimmed” (=cheap) SCART cables on the market,
but it is not sure that e. g. your videorecorder will work OK with
some of these cables.
• SCART cables are also necessary to get stereo sound from a
stereo TV and video recorder.
SCART socket
5 6
1 2 3
4
7 8 9
0
EXIT
MENU GUIDE
OK
TV
TEXT
As most local cable networks are distributing TV programmes
from both digital and analogue sources, the signals from the
wall outlet will be of two different kind:
1) Digital signal information to be handled by the Mediamaster.
These signals are sent to the TV through the SCART cable.
2) Analogue signals which are bypassed to the TV through a
RF cable.
Due to that you must connect the Mediamaster to the TV set
as described below.
• Connect the SCART cable between the TV SCART socket on
the back of the Mediamaster and the SCART input socket on
your TV.
• Connect the RF cable between the TV/VCR connection on the
Mediamaster and the ordinary areial socket on the TV set.
• You also must have another RF cable between the ANTENNA
input on the Mediamaster and the network socket.
Connecting the Mediamaster to the TV set