Nokia 9600C - Manual (Page 6)

GB 6
Connecting to a TV and a video recorder
Refer to your video recorder manual for full instructions.
• Connect one SCART cable between the TV and the
TV SCART socket on the Mediamaster.
• Connect another SCART cable between the video
recorder and the VCR SCART socket on the
Mediamaster.
• A RF cable has to be connected between the
TV/VCR output on the Mediamaster and its corresponding
input on the Video recorder.
• Finally, connect another RF cable from the RF output on the
video recorder to the TV aerial input on the TV.
Connecting to an analogue satellite receiver and a video recorder
• Connect one SCART cable between the TV and the TV SCART
socket on the Mediamaster.
• Connect one SCART cable between the TV SCART socket
on the analogue satellite receiver and the AUX
SCART socket on the Mediamaster.
• Connect one SCART cable between the video
recorder and the VCR SCART socket on the
Mediamaster.
• Connect a RF cable from the RF output on the video recorder
to the TV aerial input on the TV.
• Connect a RF cable from the TV/VCR socket on the Media-
master to the RF input on the video recorder.
• Connect a RF cable from the aerial socket to the socket
marked ”ANTENNA” on the Mediamaster.
With Video recorder
Analogue receiver
VCR
Without the VCR, you should connect as shown
in the diagram to the right.
Analogue receiver