NordicTrack NTBE01700 - Manual (Page 14)

14
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of the user’s manual for information about ordering replacement parts.
Key No. Qty. Description Key No. Qty. Description
Part List—Model No. NTBE01700
R1100A
1 1 Bench Leg
2 1 Adjustable Bench Leg
3 4 1/4” x 3/4” Screw
4 4 1/4” x 2” Screw
5 1 Bench Frame
6 4 3/8” Washer
7 1 Bench Base
8 1 Curl Pad
9 1 Curl Upright
10 2 3” x 2” Outer Cap
11 15 3/8” Nylon Locknut
12 2 3/8” x 2 3/4” Button Head Bolt
13 1 Stabilizer
14 1 Seat
15 1 Backrest
16 3 Pad Tube
17 1 Leg Lever
18 2 Bench Joint Plate
19 1 Bench Base Joint Plate
20 2 2” Square Outer Cap
21 11 3/8” x 3” Bolt
22 2 3/8” x 7 1/2” Bolt
23 1 Seat Mounting Bracket
24 2 Weight Adapter Bushing
25 6 Foam Pad
26 6 3/4” Round Inner Cap
27 2 Backrest Tube
28 6 1” x 1 1/2” Inner Cap
29 1 Weight Adapter Pin
30 9 1/4” Washer
31 6 Pad Sleeves
32 1 Weight Adapter
33 1 3/4” x 2” Inner Cap
34 1 1/4” x 1 1/4” Screw
35 1 Backrest Adjustment Bracket
36 1 Seat Adjustment Bracket
37 1 Adjustment Knob
38 1 1” Angled Outer Cap
39 1 1” Round Inner Cap
40 3 1 1/2” Square Inner Cap
41 1 3/8” x 2 3/4” Bolt
# 1 Allen Wrench
# 1 User’s Manual
# 1 Exercise Chart
17
29
24
32
USING OLYMPIC WEIGHTS ON THE LEG LEVER
To use Olympic weights on the Leg Lever (17), insert
the Weight Adapter Bushings (24) into the ends of the
Weight Adapter (32). Slide the Weight Adapter over the
weight tube on the Leg Lever. Insert the Weight Adapter
Pin (29) into the weight tube.
17
37
1
8
USING THE CURL PAD
To use the Curl Pad (8), unscrew the Adjustment Knob
(37) and lift the Leg Lever (17) out of the Bench Leg
(1). Insert the Curl Pad into the Bench Leg, and secure
it with the Adjustment Knob.
Note: When not using the Curl Pad, store it away
from the bench.