Nextar ME - Manual (Page 11)

10
Power Supply
Preparation
Using the AC Adaptor
The unit is supplied with an AC adaptor for powering and charging its battery.
2. Plug the two-prong end of the power
cord into a grounded electrical
outlet.
1. Connect AC adaptor to the USB
port, as shown on the right.
Note:
•
Turn unit's power off before unplugging.
•
When using the adaptor, the LCD screen will be brighter than with the
rechargeable battery.
Using the Car Adaptor
The unit is supplied with a Car Adaptor for powering while in a vehicle.
Connect the Car Adaptor Power
Plug to the unit’s USB port and plug
the other end to the vehicle’s 5V
accessory/ cigarette socket, as
shown on the right figure.
Attention
•
Place the unit in a proper position for viewing.
•
Disconnect the unit from the Car Adaptor when starting the vehicle.
Your portable GPS unit comes with a built-in rechargeable battery. Please see details in
the following segment.