Nextar ME - Manual (Page 23)

22
Use of the Mount
Accessories
When using the unit in vehicle, you can use the supplied mount accessories (mount
bracket, magnetic cradle and dashboard mount disk) to mount the unit in the vehicle.
Take the following steps to operate:
1. See Fig. 1. Following the arrow, slide the mount cradle onto the mount bracket
to fix it.
2. See Fig. 2. Fix the unit on the magnetic cradle.
3. See Fig. 3. Lift the suction cup lever and then press the suction cup to the
windshield. Following the arrow ①press down the suction cup lever. Then
rotate the knob to adjust the unit to proper position.
To mount to dashboard, use the included adhesive disk. Choose a clean, dry spot
on your dashboard, peel off protection liner from the back of the disk, and then
attach the disk to your dashboard.
Warning:
When you mount the device in your vehicle, ensure it has a clear line of sight to the sky.
The device must not be mounted so that it impairs the driver’s view of the road. Please
take extra precaution to ensure the airbags are not obstructed by the device.