Nikon S570 - Manual (Page 139)

127
Basic Camera Setup: The Setup Menu
S
h
oot
in
g,
Pl
ayback
an
d Se
tu
p
M
e
n
u
s
B
Note on Blink warning
When continuous is set to Continuous, BSS, or Multi-shot 16, blink warning does not function.
Operating the Blink Warning Screen
The following operations can be performed when the
Did someone blink? screen is displayed.
If no operations are performed for a few seconds, the
camera automatically returns to shooting mode.
On
When the camera detects that one or more human subjects may have closed eyes
shortly after recognizing the faces and shooting them, the blink warning screen will
appear in the monitor.
The face of a portrait subject, whose eyes may have been closed when the shutter
was released, is framed by a yellow border. Should this occur, check the picture and
decide whether or not another picture should be taken.
See “Operating the Blink Warning Screen” (
A 127) for more information.
Off (default setting)
Blink warning is not enabled.
Option Use Description
Enlarge and display
the detected face
g (i)
Rotate the zoom control to
g (i).
Switch to full-frame
playback
f (h) Rotate the zoom control to f (h).
Select the face to
display
If the camera detects more than one human
subjects with their eyes closed, press
H, I, J, or K
during the enlarged display to switch over the faces.
Delete the picture l Press the l button.
Switch to shooting
mode
k
Press the
k button or the shutter-release button.
Did someone blink?
Exit Exit Exit