Nikon S570 - Manual (Page 133)

121
Basic Camera Setup: The Setup Menu
S
h
oot
in
g,
Pl
ayback
an
d Se
tu
p
M
e
n
u
s
w Electronic VR
Choose whether to use electronic VR (vibration reduction) when taking still
pictures.
When Auto is selected, R appears on the monitor (
A 6), and electronic VR is
applied depending on shooting conditions.
B
Notes on Electronic Vibration Reduction
• Electronic VR is disabled while the flash is used, except when using slow sync mode. Note that
Electronic VR is disabled even when the flash mode is slow sync with red-eye reduction.
• If the exposure period exceeds a certain period of time, Electronic VR will not function.
• Electronic VR does not function when ISO sensitivity is set to any setting other than Auto.
• Electronic VR does not function when using the following scene modes.
- Sports ( A 35)
- Night portrait ( A 35)
- Dusk/dawn ( A 37)
- Night landscape ( A 37)
- Museum ( A 38)
- Fireworks show ( A 39)
- Backlight ( A 39)
• The effectiveness of Electronic VR decreases as camera shake increases.
• Pictures taken using motion detection may be somewhat grainy.
D
Electronic VR for Movies
To compensate for vibration while shooting a movie, go to the movie menu ( A 76) and enable
Electronic VR ( A 77).
Press the d button M z (Setup menu) (A 113) M w Electronic VR
Auto
When all of the following conditions are met while taking still pictures, electronic VR
is applied and the effects of camera shake are reduced.
• The flash is turned off or set to slow sync mode.
• The shutter speed is slow.
• The Continuous setting is set to Single.
• When the subject is dark.
Off (default setting)
Electronic VR is disabled.