Removing the battery, Turning on and off the camera, Removing the battery turning on and off the camera – Nikon S570 User Manual
Page 27
15
Inserting the Battery
First Ste
p
s
Removing the Battery
Turn the camera off and make sure that the power-on
lamp and the monitor have gone out before opening
the battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/
memory card slot cover and slide the orange battery
latch in the direction indicated by the arrow (
1
). The
battery can then be removed by hand (
2
).
• Note that the battery may become hot during use;
observe due caution when removing the battery.
Turning On and Off the Camera
Press the power switch to turn on the camera. The
power-on lamp (green) will light for a moment and
then the monitor will turn on. To turn off the camera,
press the power switch again.
When the camera is turned off, both the power-on
lamp and monitor will turn off.
If the camera is turned off, hold down the
c button to turn the camera on in
playback mode.
C
Auto Power Off in Shooting Mode (Standby Mode)
If no operations are performed for about a minute (default setting), the monitor will turn off
automatically and the camera will enter standby mode. If no operations are performed for another
three minutes, the camera will turn off automatically (the auto off function).
• If the monitor is off in standby mode (the power-on lamp is blinking), press the power switch or
the shutter-release button to reactivate it.
• The time allowed to elapse from before the camera enters standby mode can be changed from
the Auto off option (