NordicTrack NTL27005.0 - Manual (Page 21)

21
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement for speed and distance and to
turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be
shown in the display:
The priority dis-
play will show the
total number of
hours that the
treadmill has
been operated.
The lower right
corner of the dis-
play will show the
total number of miles (or kilometers) that the walking
belt has moved. In addition, an “E” for English miles or
an “M” for metric kilometers will appear in the lower left
corner of the display. Press the Speed increase button
to change the unit of measurement if desired.
IMPORTANT: If a
“d” appears in the
lower left corner
of the display, the
console is in the
“demo” mode.
This mode is in-
tended to be used
only when a
treadmill is displayed in a store. When the console is in
the demo mode, the power cord can be plugged in, the
key can be removed from the console, and the indica-
tors in the display will automatically appear in a preset
sequence. The buttons on the console will not operate.
If a “d” appears when the information mode is se-
lected, press the Speed decrease button so the “d”
disappears.
To exit the information mode, remove the key from the
console.