NordicTrack NTL27005.0 - Manual (Page 7)

7
6. Make sure that all parts are properly tightened before you use the treadmill. Place a mat beneath the
treadmill to protect the floor. For your benefit, familiarize yourself with the TROUBLESHOOTING informa-
tion on pages 24 to 26.
4. With the help of a second person, carefully raise the
Upright (83) to a vertical position. Press the Knob Sleeve
(87) into the right side of the left Upright, and press the
Latch Knob Spacer (86) into the other side of the left
Upright.
Remove the knob from the pin. Make sure that the collar
and the spring are on the pin. (If there are two collars,
make sure that there is one on each side of the spring.)
Next, insert the pin into the Knob Sleeve (87) and the left
Upright (83). Then, tighten the knob back onto the pin.
83
86
87
Knob
Spring
Collar
Pin
4
5. With the help of a second person, raise the Frame (7) to
the storage position and make sure that the latch pin is
engaged as described on page 22.
Position the Base Plate (115) on the treadmill as shown.
Attach the Base Plate with the three 2” Bolt (114). Note:
It may be helpful if a second person tips the treadmill
slightly as you tighten the Base Plate Screws.
Carefully lower the Frame (7) to the floor as described on
page 23.
115
7
114
5