Navigon MN7 - Manual (Page 12)

User’s manual MN7 PDA
- 12 - Before you begin
GPS Wizard
►
Tap on GPS Wizard and follow the instructions on the screen.
As soon as the connection is configured correctly, the M
AIN M ENU
window will open.
Configure Manually
If the GPS receiver configuration failed, you will have to configure the
GPS receiver manually.
1. Tap on Configure Manually.
2. Enter the required details. You will find the data in the GPS receiver
manual.
3. Tap on OK.
As soon as the connection is configured correctly, the M AIN M ENU
window will open.
Note: GPS reception can be impaired by heated windscreens or by
metal evaporated windscreens. If necessary, use an external antenna.
You can obtain an external antenna at a specialist dealer.
2.8 Installing the hardware in a vehicle
We recommend using a special cradle for your PDA in order to ensure
the safe operation of the navigation system in a vehicle. This will ensure
that the display is always easy to read and that the driving instructions
from the system are well understood.
You can purchase a special cradle for your mobile phone in specialist
stores.
2.9 Power supply for the PDA and GPS receiver
It is recommended to connect the PDA and GPS receiver to an external
power supply, especially for long trips.
Charging cables for connection to the cigar lighter socket are available
for almost all devices in specialist stores. These cables are often also
available online from the PDA manufacturer or GPS receiver
manufacturer.
If you want to power several devices from your vehicle's cigar lighter
socket, you will need a multiple adapter which you can obtain from a
specialist dealer.
2.10 Navigating with GPS
GPS is based on a total of at least 24 satellites orbiting the Earth and
continuously transmitting signals of their position and time. The GPS