Navigon MN7 - Manual (Page 41)

User’s manual MN7 PDA
Navigation - 41 -
Note: The volume can be controlled likewise with the keys of the
navigation device. (Refer to "Volume" on page 15)
Quitting navigation
Tap on (Back) in order to quit navigation. A dialog box will prompt
you to confirm.
Functions of the map in Navigation mode
When the map is open in Navigation mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol indicates the current
mode.
Day/Night: Changes between "Day" and "Night" display modes. The symbol
indicates the current mode.
Interim Destination: Opens the menu for entering an interim destination.
The navigation system will first guide you to this interim destination.
Afterwards you can continue your original navigation.
Skip Route Point: Tap this button to omit the next route point. This button is
active only when at least 2 route points still lie ahead of you. (Refer to
"Multi-leg routes" on page 30)
Block: Tap on this button in order to block a section of the route that lies in
front of you, i.e. to recalculate the route in order to avoid this section,
e.g. if you have heard on the radio of a traffic jam affecting this section.
Tap on this button again to remove the block.
POI on Your Route: Tap on this button to display POIs on your route. This way
you can quickly find out, for example, how far it is to the nearest
services. A destination shown here can be added as an interim
destination by tapping the (Interim Destination) button to the right
of its entry in the list.
4.6.6 Reality View
The map switches to Reality View mode when you approach one of the
following points while driving on the motorway:
►
a motorway junction
►
a three-leg motorway junction
►
the exit you must take to leave the motorway