Nortel Networks MOTOROLA BRUTE I680 - Manual (Page 21)

2. Phone Basics 11
Ph
o
n
e
B
a
s
ic
s
4. Replace the battery cover and firmly press it down
into place to ensure a proper watertight seal. With
a coin, turn the battery door latch clockwise to the
locked position.
Removing the Battery
1. Make sure the power is off so that you don’t lose
any stored numbers or messages.
2. Remove the battery cover and position your
fingernail on the top end of the battery to remove it.
Charging the Battery
Charge your battery as soon as possible so you can
begin using your phone.
Always use a Nextel-approved or Motorola-approved
desktop charger, travel charger, or vehicle power
adapter to charge your battery.
Using the Phone Charger
ᮣ Plug the flat end of the charger into the phone’s
micro USB connector and the other end into an
electrical outlet.
With the approved Li-Ion battery, you can recharge the
battery before it becomes completely run down.
WARNING: If the battery door is not properly installed, your
phone will not have a watertight seal. If the phone
comes into contact with blowing rain, damage
will occur.
WARNING: Do not handle a damaged or leaking Li-Ion
battery as you can be burned.